Mechatronic systems and materials : materials production technologies : selected peer reviewed papers from the 5th International Conference on Mechatronic Systems and Materials MSM 2009, which was held in Vilnius, Lithuania, from 22 to 25 October 2009 /
Mechatronic systems and materials : materials production technologies : selected peer reviewed papers from the 5th International Conference on Mechatronic Systems and Materials MSM 2009, which was held in Vilnius, Lithuania, from 22 to 25 October 2009 /
edited by Andrejus H. Marcinkevičius and Algirdas V. Valiulis.
- Stafa-Zuerich : Trans Tech, 2010.
- 1 online resource (436 pages) : illustrations
- Diffusion and defect data. Part B, Solid state phenomena, vol. 165 1012-0394 ; .
- Diffusion and defect data. Pt. B, Solid state phenomena ; v. 165. .
Includes bibliographical references and indexes.
Mechatronic Systems and Materials: Materials Production Technologies; Preface; Table of Contents; I. Materials; Solar Control Glass; The Mechanism of Defects Formation in Silicon Substrates; The Simulation Spreading Process of Steel Tubes Hollow; Effect of the Unit Pressure on the Selection Parameters of Intermetallic Coatings NiAl and Ni3Al after Plastic Working; Assessments of Shrinkage Degree in Bioceramic Sinters HA+ZrO2; Structure and Properties of Bioceramics Layers Used for Implant Coatings; Stress Corrosion Cracking of 5083 and 7020 Aluminium Alloys Jointed by Friction Stir Welding Tensor Interpolation of Tribological Wear in Ionitriding of 316L SteelMicrostructure State and Heat Treatment Influence on Barkhausen Noise Parameters and Residual Stress Measurements; Influence of Ageing Process on Structure and Mechanical Properties of the T24 Steel; Cyclic Fracture Analysis of Semi-Natural Cast Iron Plate with Metallurgical Defects Layer; Investigation of Copper Fragmentation Property; Effects of Vibration Energy Input on Stress Concentration in Weld and Heat-Affected Zone of S355J2 Steel; Asymmetric Process of Plate Rolling Analysis Analysis of the Plasticity of High-Carbon Alloy Steel in the Conditions of Hot Plastic WorkingEffect of Erosive Particle Velocity on the Intensity of Polymeric Coating Wear; Selective Transfer Phenomenon in Friction Couples Lubricated with Base Oils; Effect of PWHT on the Mechanical Properties of P5 Steel Welded Joints; High Temperature Corrosion of Evaporator Tubes with Thermal Sprayed Coatings; Properties of Duplex Stainless Steel Surface Layers after Burnishing Process; Investigations of Production Processes of W-Re-Ni and W-Re-Ni-Fe Heavy Metals Modification of W and Re Powders by Plasma TechniqueDevelopment of Finite Element Model of Reorientation of Cementite Lamellae in Pearlite Colonies in Wire Drawing Process for Wires Made from High Carbon Steel ; Mechanical and Physicochemical Properties of Some Originally Made Composite Materials for Dental Fillings; Surface Activity and Fluid Sorption of Titanium Alloys Soaked in SBF Solution; Steel Strips Flattening in Ball Rolling Mill; Polymer-Surface Modification with a-C:N:H Layers Plasma Chemically Deposited in RF CVD and MW CVD Systems The Characteristic of Surface Layers on Austenitic Stainless Steel after Glow-Discharge Nitriding ProcessThe Effect of Fabrication Method of Cobalt Base Clad Layer on Air Oxidation; Cobalt Base Clad Layer Resistance on the Corrosion under Low Sulfur Pressure; The Influence of Plastic Strain on the Corrosive Properties of Plasma Sprayed Intermetallic NiAl and Ni3Al Coatings; The High Cyclic Failure Analysis of Welded Joints of CT Specimens; Influence of Cavitation Intensity on the Relative Cavitation Resistance of Laser Processed C45 Carbon Steel
Mechatronics can be defined as being the synergistic integration of mechanical engineering with electronics and intelligent computer control in the manufacture of products and design of processes. Advanced engineering materials and related technologies increasingly rely upon multifunctional materials, materials resistant to extreme conditions and hybrid and multi-materials. The goal of this collection is to disseminate news of recent progress made in the area of mechatronic systems and materials production technologies, to discuss future development in mechatronics and materials science, to analyse issues related to engineering education in these fields and to bring together experts from various countries and institutions in order to exchange state-of-the-art know-how and research data. The result is an exciting overview of the field and will of interest to all of those using, or planning to use, mechatronics.
English.
9783038133766 (electronic bk.) 3038133760 (electronic bk.)
Mechatronics--Congresses.
Mechatronics--Materials--Congresses.
Mécatronique--Congrès.
Mécatronique--Matériaux--Congrès.
TECHNOLOGY & ENGINEERING--Electrical.
Mechatronics.
Electronic books.
Conference papers and proceedings.
TJ163.12 / .I58 2009eb
621.3
Includes bibliographical references and indexes.
Mechatronic Systems and Materials: Materials Production Technologies; Preface; Table of Contents; I. Materials; Solar Control Glass; The Mechanism of Defects Formation in Silicon Substrates; The Simulation Spreading Process of Steel Tubes Hollow; Effect of the Unit Pressure on the Selection Parameters of Intermetallic Coatings NiAl and Ni3Al after Plastic Working; Assessments of Shrinkage Degree in Bioceramic Sinters HA+ZrO2; Structure and Properties of Bioceramics Layers Used for Implant Coatings; Stress Corrosion Cracking of 5083 and 7020 Aluminium Alloys Jointed by Friction Stir Welding Tensor Interpolation of Tribological Wear in Ionitriding of 316L SteelMicrostructure State and Heat Treatment Influence on Barkhausen Noise Parameters and Residual Stress Measurements; Influence of Ageing Process on Structure and Mechanical Properties of the T24 Steel; Cyclic Fracture Analysis of Semi-Natural Cast Iron Plate with Metallurgical Defects Layer; Investigation of Copper Fragmentation Property; Effects of Vibration Energy Input on Stress Concentration in Weld and Heat-Affected Zone of S355J2 Steel; Asymmetric Process of Plate Rolling Analysis Analysis of the Plasticity of High-Carbon Alloy Steel in the Conditions of Hot Plastic WorkingEffect of Erosive Particle Velocity on the Intensity of Polymeric Coating Wear; Selective Transfer Phenomenon in Friction Couples Lubricated with Base Oils; Effect of PWHT on the Mechanical Properties of P5 Steel Welded Joints; High Temperature Corrosion of Evaporator Tubes with Thermal Sprayed Coatings; Properties of Duplex Stainless Steel Surface Layers after Burnishing Process; Investigations of Production Processes of W-Re-Ni and W-Re-Ni-Fe Heavy Metals Modification of W and Re Powders by Plasma TechniqueDevelopment of Finite Element Model of Reorientation of Cementite Lamellae in Pearlite Colonies in Wire Drawing Process for Wires Made from High Carbon Steel ; Mechanical and Physicochemical Properties of Some Originally Made Composite Materials for Dental Fillings; Surface Activity and Fluid Sorption of Titanium Alloys Soaked in SBF Solution; Steel Strips Flattening in Ball Rolling Mill; Polymer-Surface Modification with a-C:N:H Layers Plasma Chemically Deposited in RF CVD and MW CVD Systems The Characteristic of Surface Layers on Austenitic Stainless Steel after Glow-Discharge Nitriding ProcessThe Effect of Fabrication Method of Cobalt Base Clad Layer on Air Oxidation; Cobalt Base Clad Layer Resistance on the Corrosion under Low Sulfur Pressure; The Influence of Plastic Strain on the Corrosive Properties of Plasma Sprayed Intermetallic NiAl and Ni3Al Coatings; The High Cyclic Failure Analysis of Welded Joints of CT Specimens; Influence of Cavitation Intensity on the Relative Cavitation Resistance of Laser Processed C45 Carbon Steel
Mechatronics can be defined as being the synergistic integration of mechanical engineering with electronics and intelligent computer control in the manufacture of products and design of processes. Advanced engineering materials and related technologies increasingly rely upon multifunctional materials, materials resistant to extreme conditions and hybrid and multi-materials. The goal of this collection is to disseminate news of recent progress made in the area of mechatronic systems and materials production technologies, to discuss future development in mechatronics and materials science, to analyse issues related to engineering education in these fields and to bring together experts from various countries and institutions in order to exchange state-of-the-art know-how and research data. The result is an exciting overview of the field and will of interest to all of those using, or planning to use, mechatronics.
English.
9783038133766 (electronic bk.) 3038133760 (electronic bk.)
Mechatronics--Congresses.
Mechatronics--Materials--Congresses.
Mécatronique--Congrès.
Mécatronique--Matériaux--Congrès.
TECHNOLOGY & ENGINEERING--Electrical.
Mechatronics.
Electronic books.
Conference papers and proceedings.
TJ163.12 / .I58 2009eb
621.3